DualNight M12

Çift Lens. 100,000 Sebep...

MOBOTIX’in iki adet yüksek çözünürlüklü sensöre sahip , çift lenli gündüz/gece kamerası düny üzerinde 100,000 ‘den fazla kurulumda başarılı bir şekilde kullanılmaktadır.Gündüz için mükemmel renk ve gece için çok yüksek duyarlılıklı siyah beyaz sensör.MOBOTIX’ten mekanik hareketli parça kullanmadan akıllı ve dayanıklı profesyonel bir çözüm.

 

MOBOTIX HiRes video replaces up to 6 cameras …

  • Gündüz ve gece uygulaması için iki farklı görüntü sensörü
  • Yüksek şözünürlükü video kaydı ile dahili DVR
  • Çok kolay kurulum için fabrikada sabitlenmiş lensler
  • Dayanıklı, düşük bakımlı ve kablo korumalı
  • Isıtma ya da soğutma ihtiyacı olmadan çevresel koşullara dayanıklı 30° - +60°C (-22° - +140°F), (IP65)
  • Sürekli dijital yakınlaştırma, pan ve tilt
  • Dahili mikrofon, hoparlör ve PIR hareket sensörü

                                                 M12 DualNight Teknik Özellikleri

Modeller                                    Web, IT, IT-DNight, Sec, Sec-DNight, Sec-R16

Lensler                                      22 to 135 mm format, horizontal angle 90° to 15°

Duyarlılık                                   Renkli: 1 lux (t=1/60 s), 0,05 lux (t=1/1 s)
                                                 Siyah / Beyaz: 0,1 lux (t=1/60 s), 0,005 lux (t=1/1 s)

2 Sensör                                    2 x 1/2" CMOS, progressive scan

Maks. Görüntü çözünürlüğü        Renkli: 2048 x 1536 (3Mega), Siyah / Beyaz: 1280 x 960 (Mega)
                                                Dual image: 2560 x 960 (2.5 Mega), no QXGA

Görüntü Formatı                        2048 x 1536, 1280 x 960, 1024 x 768, 800 x 600,
                                                768 x 576 (D1), 704 x 576 (TV-PAL), 640 x 480,
                                                384 x 288, 352 x 288, 320 x 240, 160 x 120;
                                                serbest görüntü formatı seçimi (e.g. 1000 x 200 for skyline)

Maks. Kare hızı (M-JPEG)         VGA: 16 fps, TV-PAL: 12 fps, Mega: 6 fps, 3Mega: 4 fps
(Canlı/Kayıt)

Maks. Video Yayını (MxPEG)     VGA: 30 fps, TV-PAL: 24 fps, Mega: 14 fps, 3Mega: 10 fps
(Canlı/Kayıt/Ses)

Görüntü Sıkıştırma                    MxPEG, M-JPEG, JPG, H.263 (Video-VoIP-Telephony)

Dahili DVR                                CF card (16 GB) veya SD card (32 GB'a kadar)

Harici depolama                         Harici kayıt yazılımı gerekmeden NAS ve PC/Sunucu’ya direk kayıt

Yazılım (içerik)                           Video Yönetim Yazılımı MxEasy,
                                                 Kontrol odası yazılımı MxControlCenter

Görüntü işleme                           Geri ışık düzeltme, otomatik beyaz dengesi,
                                                 görüntü bozulma düzeltme, video sensörü (hareket algılama)

Sanal PTZ                                 Sanal Pan/Tilt/Yakınlaştırma, sürekli 8x yakınlaştırma

Alarm/Events                             Dahili hareket algılama, harici sinyal, sıcaklık sensörü, e-posta üzerinden 
                                                 bildirim,FTP,IP Telefon (VoIP-SIP), görsel/akustik alarm (alarm öncesi ve sonrası(
                                                 görüntüler) ile olay tetikleme

Ses                                           Dahili mikrofon ve hoparlör, dudak eşlemeli ses, çift yönlü hoparlör, ses kaydı

Arayüzler                                   Ethernet 10/100, ISDN, RS232, 1 x In, 1 x Out (electrically separated from power supply)

Ses/ Telefon                              VoIP,SIP, çift yönlü hoparlör, aahtar kod ile uzaktan kontrol, olay bildirimi

Güvenlik                                   Kullanıcı / Grup yönetimi, HTTPS/SSL, IP adres filtresi, IEEE 802.1x, Intrusion 
                                               Detection

Sertifikalar                               BGV C9 (“UVV”), EMV (living environments, industry), EN 50155 (shock, vibration, temperature), CE, FCC

Güç kaynağı                            Year-round power over Ethernet (IEE 802.3af; Class 0), Netpower-Adapter, typ. 4 W

Çalışma şartları                       IP65 (DIN EN 60529), -30° bis +60 °C (-22°F to +140°F)

Boyutlar                                  WxDxL: 14,2 x 15,5 x 17 cm, Ağırlık: ca. 850 g (incl. wall mount)

Standart Teslimat                    Weatherproof housing (reinforced composites - PBT-30GF), white, SecureFlex 
                                               wall/ceiling mount with turn/tilt mount and concealed cabling, covers RJ45 wall 
                                              outlets, incl. 2 lenses, mounting parts, allen wrench, patch cable, manual, software

Montaj Seçenekleri

Duvara Montaj

Tavana Montaj

Eğimli (duvar Montajı)
• Yatay180°
• Dikey 70°

Eğimli (Tavan Montajı)
• Yatay: 360°
• Dikey 90°

Özellikler

SecureFlex montaj duvara veya tavana MOBOTIX M12 modelleri kolay monte edilmesini sağlar; gizli kablolama kurulum görsel izlenim geliştirir. Verilen duvara montaj ayak zarif kapak prizlerden için yeterince büyük.

res/dnmo5.jpg

montaj Talimatları

Duvar Outlet üzerinde Kamera Montaj

Mounting the SecureFlex mount to a wall allows covering RJ45 wall outlets (without frame) and also allows using a defined network end point.

When positioning the wall outlet, make sure that the outlet lines up with the upper rim of the mount later on (see figure below and the drilling template at the end of the manual).

If no wall outlet is present, use a suitable extension or an adapter to connect the camera to the network.

When installing an above-the-wall assembly, breaking out one of the four openings in the base of the mount will provide for properly guiding the cable into the mount.

Mounting on the Pole Mount

If you are intending to mount the camera on a pole, you should consider using the MOBOTIX SecureFlex Pole Mount. This mount is made of 3 mm powdercoated stainless steel (white) and has been designed specifically for outdoor use. The supplied stainless steel straps allow fixing the mount to poles with diameters between 60 and 180 mm (2.4" to 7.1").

Adjusting the Tele Lens Focus

How to recognize the 135 mm tele lens: The 135 mm tele lens has two notches opposite from one another and is not covered by a glass pane. It can be removed using the supplied adjustment ring, which is also used for adjusting the tele lens focus.

Once the camera has been mounted, the tele lens should be checked for proper sharpness and should be adjusted, if required. Make sure that you have the supplied adjustment ring ready for this purpose.

  • Make sure that you see the camera's live image on a monitor for this purpose.
  • Position the adjustment ring on the tele lens. The two prongs fit exactly into the notches of the lens' rim!
  • Cautiously turn the lens in clockwise or counter-clockwise direction until the image is properly focused.

Connecting the camera

The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux, ...).

If the camera is supplied with Power over Ethernet (a PoE switch), then no other device will be necessary for supplying power.

Establishing the Power Supply to the Camera

You can choose between the following options:

  1. External power supply and Network Power Adapter (MX-NPA-3-RJ): Power supply of one camera injected into the network cabling (max. length 100 m (110 yd)), from the NPA to the 10BaseT/NET connector of the camera.
  2. Network Power Box/Rack (MX-NPR-4, or 8/20): Power supply of 4/8/20 cameras injected into the network cabling (max. length 100 m (110 yd)), from the NPR to the 10BaseT/NET connector of the camera.
  3. Power over Ethernet: Power supply using network components that are conforming to the PoE standard.

Power Supply (MxPoE) Using a Switch

  1. Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
  2. Connect the LAN/Power connector of the Network Power Adapter to an Ethernet connector of the switch/router or the Ethernet wall outlet.
  3. Plug the RJ45 connector of the external power unit into the PC/Power connector of the Network Power Adapter.

Power Supply (MxPoE) When Connected Directly to a Computer

  1. Connect the factory pre-installed cable of the camera to the Camera connector of the Network Power Adapter.
  2. Connect the PC/Power connector of the Network Power Adapter to the Ethernet port of the computer.
  3. Plug the RJ45 connector of the external power unit into the LAN/Power connector of the Network Power Adapter.

Power Supply (MxPoE) Using a Network Power Rack or Network Power Box

  1. Connect the factory pre-installed cable of the camera to the CAM connector of the Network Power Rack (MX-NPR-8/20) or the Network Power Box (MX-NPR-4).
  2. Connect the LAN connector of the Network Power Rack or Network Power Box to an Ethernet connector of the switch/router.

Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products

Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE switch/router. The switch/router needs to support the PoE standard IEEE 802.3af.

ISDN: Power Supply Using a Network Power Adapter

  1. Push the designated connector of the ISDN split cable (MX-OPT-ISDN-SPLIT; optional accessory) into the 10BaseT/NET connector and the remaining cable into the ISDN connector of the camera.
  2. Use an 8-wire (patch) cable to connect the Camera connector of the Network Power Adapter to the socket of the ISDN split cable.
  3. Connect the LAN/Power connector of the Network Power Adapter to the ISDN S0 bus/NT.
  4. Plug the RJ45 connector of the external power unit into the PC/Power connector of the Network Power Adapter.

Maximum Cable Lengths (ISDN):

  • Connection to ISDN outlet: max. 5-10 m (16 to 33 ft.)
  • Connection to NT (without termination resistors): max. 5-10 m (16 to 33ft)
  • Connection to NT (with termination resistors): 120 m (130 yd)

Missing termination resistors and wrong cable lengths are the most common installation errors! Always observe the instructions regarding maximum cable lengths and proper ISDN termination!

ISDN: Directly Supplying Power Using the External Power Supply

  1. Connect the ISDN connector of the camera to the S0 bus/NT.
  2. Plug the RJ45 connector of the external power supply into an RJ45 extension cable and plug the extension into the 10BaseT/NET connector of the camera.

Ethernet and ISDN

In order to use Ethernet and ISDN simultaneously, plug the Ethernet and ISDN cables into the corresponding connectors of the camera. Power is supplied only via the Ethernet cable and the 10BaseT/NET connector of the camera (using MOBOTIX PoE products or Power over Ethernet according to IEEE 802.af)